Differential Pressure Transmitter
Output: mV
Accuracy: 0.25%FS
Max. static pressure 20MPa
New Product Change Notice (PCN) effective Jan 1, 2025. MICROSENSOR appreciate your understanding.
-
Products
- Solutions
- Service Support
Pages
- Pressure Sensor
- Pressure Transmitter and Transducer
- What is a Pressure Transducer？
- Level Transmitter and Sensors
- Differential Pressure Sensors
- Differential Pressure Transmitters
- Level transmitter for Fuel and Chemical
- Water Pressure Sensors
- Tank Pressure Sensors and Transmitters
- Hydrostatic Level Measurement
- Oil Pressure Sensors and Transmitters
- Company
Differential Pressure Sensor
MDM290
- · Φ19×26mm
- · 0.35Bar ‒ 35Bar
- · Laser Trimmed Thick-film Circuit Board
Used For
Differential Pressure Measurement, Pressure Calibrator, Ventura and Eddy-current Flow Meter
Leave a MessageMDM290
Used For
Differential Pressure Measurement, Pressure Calibrator, Ventura and Eddy-current Flow Meter
Leave a MessageThe MDM290 differential pressure sensor is piezoresistive and oil-filled type, isolated by a stainless steel corrugated diaphragm. As differential pressure sensor suppliers, Micro Sensor's pressure-sensitive components are assembled on advanced production lines, automatically tested and compensated by computer. The high and low-voltage ends are protected by isolation diaphragms. Both pressure chambers can be in contact with certain corrosive fluid media. The installation dimensions align with typical products, ensuring that the MDM290 sensor offers excellent interchangeability. MDM290 can be as an air differential pressure sensor for different gases. It is widely used in industrial process control and other fields to measure differential pressure.
Features
• Measuring range: 0.35Bar~35Bar
• Suitable for a variety of fluid media
• All 316L stainless steel material
Construction Performance
• Diaphragm: Stainless steel 316L
• Housing: Stainless steel 316L
• Pin: Silicon rubber flexible wire
• O-ring: FKM
Environment Condition
• Shock: No change at 10gRMS,(20 ~ 2000)Hz
• Impact: 100g, 11ms
• Media compatibility: The gas or liquid which is compatible with stainless steel and FKM
Image:
The MDM290 differential pressure sensor is piezoresistive and oil-filled type, isolated by a stainless steel corrugated diaphragm. As differential pressure sensor suppliers, Micro Sensor's pressure-sensitive components are assembled on advanced production lines, automatically tested and compensated by computer. The high and low-voltage ends are protected by isolation diaphragms. Both pressure chambers can be in contact with certain corrosive fluid media. The installation dimensions align with typical products, ensuring that the MDM290 sensor offers excellent interchangeability. MDM290 can be as an air differential pressure sensor for different gases. It is widely used in industrial process control and other fields to measure differential pressure.
Features
• Measuring range: 0.35Bar~35Bar
• Suitable for a variety of fluid media
• All 316L stainless steel material
Construction Performance
• Diaphragm: Stainless steel 316L
• Housing: Stainless steel 316L
• Pin: Silicon rubber flexible wire
• O-ring: FKM
Environment Condition
• Shock: No change at 10gRMS,(20 ~ 2000)Hz
• Impact: 100g, 11ms
• Media compatibility: The gas or liquid which is compatible with stainless steel and FKM
Read / Download our Datasheet in PDF
Download
- Related Products
- Related Accessories
Relate Solutions
-
Industrial Wastewater Treatment System Flow Measurement
In response to the national sustainable development strategy, enterprises typically install industrial wastewater treatment equipment, such as magnetic flowmeters and open channel flowmeters, to monitor and measure wastewater treatment and discharge.
more info... -
Pulp Tank
Using shear and agitation to evenly distribute the fibers, the pulp tank in the papermaking process combines pulp and water. Following mixing, shearing, and temperature control, the processed slurry is released to feed the machinery used in the papermaking process downstream. The slurry can only enter the headbox for the subsequent step if the level is measured accurately.
more info... -
Additive Tank
During machine downtime or product changes, the press rolls are cleaned and coated with a specialist solution to protect against adhesions and deposits, hence avoiding paper difficulties. The 50°C coating mixture is pushed through the machine. To maintain automated functioning, the tank's level and filter status must be continuously monitored.
more info... -
Ballast Tank Level Monitoring
Ballast tank level monitoring achieves precise control of the ballast water system by using equipment such as electromagnetic flowmeters, level transmitters, and pressure transmitters to monitor data on inflow, tank liquid level, and pressure.
more info...
Copyright © 2026 MICRO SENSOR CO., LTD
